**•How To Make Skyrim Run Better On PS3!•**
Tired of the game-breaking lag with your 20meg Skyrim save files? Here is a guide to help prevent these issues:
1) "Deleting Excess Save Files"
•Go to "Save Data Utility" on the XMB & check how many Skyrim saves 你 have. If 你 have 更多 then three, 删除 them. 你 must only have three saves maximum. Also make sure to 删除 any "Auto-Saves."
2) "Freeing Up HDD Space"
•Check how many GBs 你 have left on your console. Go to "Settings," "System Setting" & then open "System Information." It will 显示 你 how many GBs 你 have used and how much 太空 你 have left. e.g: 233/320GB. The number on the left will 显示 how many GBs 你 have left. If 你 don't have much, scroll across the XMB to "Game Data Utility" and 删除 any game's data that 你 aren't playing anymore/lately. Don't worry, Game data is only "install data," when 你 decide to play the game again 你 will just have to install again and your saves will not be affected. If 你 also want to copy & 删除 game saves, scroll down from "Game Data Utility" and select "Save Data Utility." If 你 have important saves, don't worry about them. Saves take up hardly any 太空 compared to "Game Data." If 你 want to free-up as much 太空 as possible, 你 can plug a USB into the PS3 and copy "non-copy-protected" saves to your thumb drive. That way 你 can 删除 them off of 你 system and just copy them back from the USB when 你 want to play them again. #NOTE# 你 can copy some "Game Data Utility" as well as "Save Data Utility" if 你 want to do both. Make sure 你 have as much 太空 as possible because Skyrim needs quite a bit of HDD 太空 to run properly. My Skyrim Game Data is about 4-5 GBs.
2) Tweaking "Game & Display Settings"
•Sometimes "Graphical Enhancement" settings can interfere with gameplay performance such as frame-rate dips, glitches & lag in massive games like Skyrim. (Don't worry, 你 will be changing these settings back later!)
#Temporarily Disable The Following:
*Go to "Game Settings" and turn "PS Smoothing" to "Off."
*Scroll down to "Display Settings" and disable/limit all the HDMI Features:
- Super White
- RGB Range to "Limited."
- Cross-Colour Reduction Filter
- Deep Colour Output
3) "Permanently Disabling All In-Game Auto Saves & Testing Performance"
•After you've put all of the ^ *above settings to either "off" 或者 "limited," insert your Skyrim disc and load it up.
Once the game has loaded, go to setting and disable all Auto-Saves listed below (if 你 haven't already.)
*Save on Wait
*Save on Fast Travel
*Save on Rest
*Save on Character Menu
^ *This will prevent in-game stuttering when your system forces your game to save automatically. It may also decrease 下载 times significantly as well as preventing auto-save files from filling up your load & save menus.
4) "System Restart & Re-Enabling Settings"
•When you've disabled all of the "Auto-Save" options, exit the menu and test how your game is running. Is it good, OK, annoying 或者 terribly unplayable? Most likely it'll either be worse 或者 a even a tiny bit better than it was before 你 changed the settings. If it's at least a little better, it'll probably still be, well...BAD!
Don't worry! A system restart and another change of settings should fix that right up!
*Quit the game and turn the PS3 off then on again.
*When the PS3 has turned on again, go to back to "Game" and "Display Settings" to re-enable the settings 你 disabled.
#NOTE# After this 你 can restart the system again if 你 want to. 你 do not have to.
With your re-enabled "Graphic Settings," load up Skyrim again and enjoy the (at least temporary) smoother, consistent frame-rate & a lot less lag! ;) *^_^*
This 文章 is by:
~*•Žÿłįçę*•~
Tired of the game-breaking lag with your 20meg Skyrim save files? Here is a guide to help prevent these issues:
1) "Deleting Excess Save Files"
•Go to "Save Data Utility" on the XMB & check how many Skyrim saves 你 have. If 你 have 更多 then three, 删除 them. 你 must only have three saves maximum. Also make sure to 删除 any "Auto-Saves."
2) "Freeing Up HDD Space"
•Check how many GBs 你 have left on your console. Go to "Settings," "System Setting" & then open "System Information." It will 显示 你 how many GBs 你 have used and how much 太空 你 have left. e.g: 233/320GB. The number on the left will 显示 how many GBs 你 have left. If 你 don't have much, scroll across the XMB to "Game Data Utility" and 删除 any game's data that 你 aren't playing anymore/lately. Don't worry, Game data is only "install data," when 你 decide to play the game again 你 will just have to install again and your saves will not be affected. If 你 also want to copy & 删除 game saves, scroll down from "Game Data Utility" and select "Save Data Utility." If 你 have important saves, don't worry about them. Saves take up hardly any 太空 compared to "Game Data." If 你 want to free-up as much 太空 as possible, 你 can plug a USB into the PS3 and copy "non-copy-protected" saves to your thumb drive. That way 你 can 删除 them off of 你 system and just copy them back from the USB when 你 want to play them again. #NOTE# 你 can copy some "Game Data Utility" as well as "Save Data Utility" if 你 want to do both. Make sure 你 have as much 太空 as possible because Skyrim needs quite a bit of HDD 太空 to run properly. My Skyrim Game Data is about 4-5 GBs.
2) Tweaking "Game & Display Settings"
•Sometimes "Graphical Enhancement" settings can interfere with gameplay performance such as frame-rate dips, glitches & lag in massive games like Skyrim. (Don't worry, 你 will be changing these settings back later!)
#Temporarily Disable The Following:
*Go to "Game Settings" and turn "PS Smoothing" to "Off."
*Scroll down to "Display Settings" and disable/limit all the HDMI Features:
- Super White
- RGB Range to "Limited."
- Cross-Colour Reduction Filter
- Deep Colour Output
3) "Permanently Disabling All In-Game Auto Saves & Testing Performance"
•After you've put all of the ^ *above settings to either "off" 或者 "limited," insert your Skyrim disc and load it up.
Once the game has loaded, go to setting and disable all Auto-Saves listed below (if 你 haven't already.)
*Save on Wait
*Save on Fast Travel
*Save on Rest
*Save on Character Menu
^ *This will prevent in-game stuttering when your system forces your game to save automatically. It may also decrease 下载 times significantly as well as preventing auto-save files from filling up your load & save menus.
4) "System Restart & Re-Enabling Settings"
•When you've disabled all of the "Auto-Save" options, exit the menu and test how your game is running. Is it good, OK, annoying 或者 terribly unplayable? Most likely it'll either be worse 或者 a even a tiny bit better than it was before 你 changed the settings. If it's at least a little better, it'll probably still be, well...BAD!
Don't worry! A system restart and another change of settings should fix that right up!
*Quit the game and turn the PS3 off then on again.
*When the PS3 has turned on again, go to back to "Game" and "Display Settings" to re-enable the settings 你 disabled.
#NOTE# After this 你 can restart the system again if 你 want to. 你 do not have to.
With your re-enabled "Graphic Settings," load up Skyrim again and enjoy the (at least temporary) smoother, consistent frame-rate & a lot less lag! ;) *^_^*
This 文章 is by:
~*•Žÿłįçę*•~
